Quantcast

Before & After Photos

Click on a photo to enlarge.

Installing an Egress Window in Otis, MA.

This homeowner in Otis, MA needed a new window in order to ensure that he would have a secondary way to get out of his basement in case of emergency. Unfortunately, there was not a pre-existing window in the basement, as is often the case. Additionally, there was not a straightforward spot to put the window due to the terrain around the home.

 

Luckily, Fogarty's was able to identify a spot that the window would be able to go into. We then marked off where the mini-excavator should remove dirt, rocks, and other material from around the space. We then measured out and marked where the window would ideally go. We found that putting the window in the closet would be the best spot, and marked that part of the drywall and tore it out.  On the outside, we prepped and cut the foundation so that it would fit the egress window. We then framed the window and installed it. Once we finished that, we were able to install the window well around it. The homeowner and his family loved the window, and their basement will stay safe and comfortable for years to come! 

Insulating Walls to Make Basement Warmer in Sheffield, MA

This customer contacted Fogarty's Home Services for help with her unfinished basement. She wanted to have our team create a nice, well-insulated "man cave" for her husband. The house had been recently purchased, and our customer wanted to ensure that her husband had a finished space to call his own. The insulation in the basement was in need of replacement. The walls themselves were not insulated at all, and were simply poured concrete. This made the basement very cold in the winter. In the summer, the warm and humid air created condensation on the walls, which caused mold in some of the insulation.

 

In order to ensure that the entire basement was sealed and protected, we installed Foamax™ boards around the entirety of the basement. These boards are installed with Dr. Energy Saver's proprietary Foam-Tite fasteners. We also sealed the rim joist with spray foam insulation.   The end result is lower energy bills and a warm, comfortable basement for the customer that is ready for transformation into that 'man cave'.

Total Basement Finishing Sump Pump Covering In Lenox, CT

To help provide the homeowners with a nice finished look in their basement we created a cover for the sump pump. 

Total Garage Finishing in Pittsfield, MA

This homeowner called us for an estimate on finishing their garage. They decided to move forward with our Total Basement Finishing services. So, we design the layout with the homeowner, and got started.

To start this project, we removed all of the sheet rock, paint, and fiberglass from this garage. Now, we are ready for our installation! We take our patented, non organic material and customize it to fit the size of this garage. This non-organic material is waterproof, and will never rot or mold like wood could! We install our Everlast wall panels with insulation boards on the inside, on to the wall and we are all set!

Thanks to Dr. Energy Saver by Eco Energy Solutions, this homeowner has a beautiful, waterproof garage!

Basement Finishing in Dalton, MA

Our Products
Finishing Ideas
About
Learning Center
Become a Dealer
Free Estimate